Home > Not Detected > Ide Hard Drive Not Detected In Bios

Ide Hard Drive Not Detected In Bios


i still don't understand why it still does that. Ensure the HDD is set to Master; check if your has different settings for Master alone and Master with Slave Present (some do, some don't). Then, test with just one device plugged into the secondary and jumpered as master.To get into the BIOS depends on the system you have. An IDE cable can support two devices, one as a Primary and one as a Secondary. http://quodsoftware.com/not-detected/hard-disk-not-detected-in-bios.html

March 7, 2012 DuROi Hi Dave, i have a old Vaio VGN-FS115M with a Hitachi 80Gb hard disk. I tried to keep the drive in external hard disk case and kept in usb port. First step might be to try to return to the last configuration that worked. In my experience, though, partition problems should not cause the drive to not be detected in BIOS. find more

Ide Hard Drive Not Detected In Bios

If not, that's bad news and could mean an electrical board problem with the drive. If the test returns any error contact the manufacturer. March 21, 2012 Dave Is this your main boot drive or a spare storage drive? August 3, 2011 satendra sharma hard disk not detected in bios setup.and change the sata port but same reason.

I have checked system's cables, power supply and also changed them but in vain. Is your comp sata set on AHCI or IDE? The jumper pins on the back of the drive should be set to Master for the Primary and Slave for the Secondary. Hdd Not Detected In Bios Fix I will try it anyway just for the lulz and let you know the results.

If still not detected, Hard Drive needs to be replaced. * 4. Was it working prior and quit or has it always been this way? I reluctantly installed Acronis' MaxBlast5, stepped through the program, and got Drive F: to appear on My Computer… hooray! I don't remember seeing any setup steps for configuring the BIOS within linux, but I may have possibly missed it.Would the output of lshw be enough to tell if the IDE

Swapped the cables, used different ports, even removed the CMOS battery for 30 seconds. Detecting Ide Drives Problem This isn't the ideal situation because it will slow communication between the two CD's. Ask a question and give support. http://www.newegg.com/Product/Product.aspx?Item=N82E16822148764&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel-_-Content-_-text-_- It is not showing up in my Bios or Disk management, only my normal 250gb hdd.

Hard Disk Not Detected In Bios

March 20, 2012 Dave If you installed Windows on drive 2 with drive 1 installed, it should have added something to the bootloader giving you the option to boot to either my response Is it dead? Ide Hard Drive Not Detected In Bios July 12, 2012 mahesh Thanks Dave, The drive is spinning. How To Repair Hard Disk Not Detected The hard drive was a 250 GB and it died so I replaced it with a new hard drive which is 1 TB.

If system restore fails or unable to access safe mode, follow next step. 6. weblink LOL, what could you tell me about this weird or peculiar problem?? March 16, 2012 Rui Araújo Hello Dave! Hdd detectd in bios. Internal Hard Disk Not Detected

Jumpers are set correctly and cable and drive are both good. Like possibly the HDD and cable from your aunt's computer, if it's IDE. I connected it up Ok and it showed in Bois and windows. navigate here This seems like a very promising answer, especially since I know for a fact I removed the jumper when I installed the HDD (setting it to slave) as the only experience

March 2, 2011 Wessam S yeah i tried both,so bad i didnt have back up it had all my apps and games. :S thanks btw March 3, 2011 Mark I hello, Hard Disk Not Detected In Bios Laptop Thanks in advance June 16, 2012 Mark Hi, i am running two hardrives a 74gb WD and a 1.5TB WD both SATA drives, the problem I am having is that sometimes Booting from cd well.

solved Compaq Deskpro: IDE Primary Drive 0 not being detected by the BIOS.

April 2, 2012 Dave Jane. December 31, 2013 Dave It should be necessary to replace the cable unless you see that it is damaged. If it does, you have to start looking for some odd conflict between the two drives.I expect that may NOT solve the problem, and you'll be looking for other things. Bios Doesn't Detect Ide Hard Drive Did you install Windows on drive 2 with drive 1 removed?

So I tried swapping SATA slots, it worked. This was intermittent and eventually it occurred every time I logged on. Thanks in advance! his comment is here Ask a new question Read More BIOS Storage Cable Related Resources solved Old master IDE hard drive not showing up in Win10 Explorer solved Second IDE Drive not showing in Windows

Then what? Exactly right, in both messages. 0Votes Share Flag Collapse - Close, but not quite by ldp_frog · 9 years ago In reply to IDE DVD-R I discovered that for some reason These viruses are difficult to detect and scan with anti-virus software. I cant formate that I've my whole studies data in that disk.

If not, try switching cables around so that the 80 GB HDD is fed power by the connector that used to go to the optical drive. BUT next morning, the same old story, BIOS don´t recognize my HD Hitachi 80Gb until i play with some progs in hirens boot cd. Report shree- Sep 3, 2013 at 11:46 AM Good one........... I put my laptop hard drive Seagate ST950042 0AS 500 gb (it stopped working) into external enclouser and plug into my other laptop throughr USB.

They can help you diagnose problems, copy files, and perform partitioning and formatting functions for those specific models. The good news is, the drive is spinning up and not making any odd clicks or grinding sounds. One day the computer failed to boot and would not go further than the vista "microsoft corporation" green load bar screen at the begginging of boot-up. I installed this drive back into my dell deskptop and popped in my XP CD to see if I can install the OS.

Reboot and set your BIOS back to IDE and then boot into Windows. Is this a HDD failure or a software issue??