Home > Hard Drive > Bios Cannot Detect Hard Drive

Bios Cannot Detect Hard Drive


If I plug it into another IDE port while Windows is running, Windows shudders to a halt and hangs. Flag Permalink This was helpful (0) Collapse - Well, it's really wierd... After Login Screen, Black screen... It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang weblink

Does it even matter? I've tried two, hope I didn't kill them both... –Novicode May 20 '13 at 23:35 2 I think he may mean "Hot swappable". I only said it, because it just happen to me two days ago during a repair. Such opinions may not be accurate and they are to be used at your own risk.

Bios Cannot Detect Hard Drive

Already have an account? I plugged everything in and installed the drivers and it worked great. Trouble is I have no floppy drive on my new computer, so I have to go today to buy an external usb floppy drive.

So four years ago, I custom built a new computer which ran really well. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and As soon as windows starts to load, plug in that molex to power on the IDE drive. Mike Sturgeon Windows XP Support 10 12-08-2011 01:19 PM [SOLVED] Installed new SATA HDD Now I can't see IDE HDD Before I continue I want to let everyone know I did

If it must be paired up with another device, it's generally better to be a CD/DVD drive than another HDD. Detecting Ide Drives Error Solution Three Word Game 2016 Internet connectivity problems » Site Navigation » Forum> User CP> FAQ> Support.Me> Steam Error 118>> Trusteer Endpoint Protection All times are GMT -7. No, create an account now. http://www.overclockers.com/forums/showthread.php/533321-Won-t-detect-IDE-hard-drive Hardware & Devices SSD and hard drive detect problemHi, I have installed Windows 7 on my SSD and it has only 1 partition.

Help.Hello everyone. But, if a PSU is flaky, the only real way to test it is under an electrical load. Tags:windows xpBIOS Minglewood December 19, 2011 at 09:22:53 Specs: Windows XP, AMD Athlon XP 3000+/Dane-Elec D1D400-064283N 1 GB PC3200 DDR SDRAM x 3 Asus A7V8X-X motherboard with AMD Athlon XP 3000+ Select xxx RAID, where xxx is the name of your RAID controller card, or the name of the RAID chip on that card.

Detecting Ide Drives Error Solution

Boot into the SATA windows drive as usual. ONE HDD MUST be set to be Master using the jumper on the back edge and the diagram. Bios Cannot Detect Hard Drive Bios found both then. I'm about at the point of burning about 10 dvds to backup what i need.

Cool, thanks, I will try that next time I have a similar problem. have a peek at these guys If you touch the side of the drive you should feel a slight vibration. jgutz2006Dec 30, 2011, 9:07 PM Ok so if its recognizing both on the same cable, check the jumpers if your plugging one of the drives into a "master" plug with "slave" However this was on budget systems, some which were due to be disposed of, so there was no risk for me.

What kind of art (if any) would be possible in a world without imagination? See More: Hard drive disappeared from BIOS, BIOS wont detect. Go to control panel. check over here Reply With Quote 10-30-07,12:06 PM #7 aja View Profile View Forum Posts Member Join Date May 2005 Location SOUTH AFRICA, and yes, we do have electricity, and no, lions dont walk

You will need to enter the the BIOS setup in order to verify their current state.   When you add a second drive to the system, it may be need to be The boot device order list is typically generic and does not refer to a specific device, but rather how a device gets used if it is detected. Report • #20 Minglewood December 28, 2011 at 10:14:47 Well, I just got a little lucky on my way to the grocer.

PC Games \ System Tools \ Macintosh \ Demonews.Com \ Top Downloads MajorGeeks.Com \ News (Tech) \ Off Base (Other Websites News) \ Way Off Base (Offbeat Stories and Pics) Social:

The hard drive in my Dell XPS 1640 laptop failed, and so i bought a new one and was planning to do a fresh install of Windows 7. Model number WD200BB, 2MB cache drive. I have also had some trouble with different brands of drives in one system. And the crazy thing is, as I said, it had worked for a few days and one morning just wouldn't boot.

You could be or have damaged the drive. Desktop: AsRock X99 WS | 5820k | 32 GB G.Skill | GTX 1080 | Intel 750 NVME 400GB & 1 TB Samsung Evo | Windows 3.1 | 6x 2560x1440 Monitors VM Discussions cover Windows 2003 Server, Windows installation, adding and removing programs, driver problems, crashes, upgrading, and other OS-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion BIOS Won't Recognize 2nd IDE Hard Drive! this content MSI P67a-G43 i5-2500k @ 4ghz | Heatkiller 3.0 8GB Samsung DDR3 2100 Corsair Force 3 180GB SSD XFX 290 Unlocked | EK Waterblock + Backplate Corsair HX850W - Corsair 650D Black

Might also swap IDE cable just to rule out a bad cable. ********** If none of that helps try setting the WD jumper to master according to its label, put it Report • #13 Minglewood December 27, 2011 at 08:40:20 1) I don't have/find a manufacturers HDD test/diagnostics utility.2) the drives are all used but all working in other computer as well Check that the boot HD cable is connected to the primary (0) IDE connection on the motherboard it will be printed on the board. If i put it on the secondary ide slot still no detection but i boot off of my regular raid drives.