Home > Asus A7n8x > Asus A7n8x Deluxe Bios Settings

Asus A7n8x Deluxe Bios Settings

When I benched the memory now at 100% it was slightly slower, but not a whole lot. but anyway still a great job done!! You may also need to set the voltage. It obviously runs cooler modified, but stock seems ok up to 200fsb at least. http://quodsoftware.com/asus-a7n8x/asus-a7n8x-bios-settings-please.html

I always get errors when burning, it worked fine on my previous motherboard what’s wrong? Didn't the KT333 chipset do the same thing, run the RAM slightly faster than the CPU. Flash the new 1002 bios. Must have taken you a while! http://www.techspot.com/community/topics/asus-a7n8x-deluxe-bios-settings.7100/

Boot using your DOS floppy disk to the ‘A:\>’ command prompt. As a result, trying to run a 3.3v AGP card on the A7N8X isn't going to happen. This shouldn't cause a problem, but $2 at radio shack might be the fix you're looking for. Keep doing this as long as you are stable in windows/3dmark/prime, etc. 7.

Lord Krim has made a nice little list for you to follow when installing nForce drivers in Windows98/se. Several functions may not work. Try the #1 & #3 slot in your motherboard. The IDE driver packaged in the nVidia nForce UDP v.2.00 package doesn’t work well for a lot of people.

Cereberus, Mar 7, 2003 #2 Cereberus Newbie Interesting and helpfull tips : 1. Last but not least, there is a jumper on the motherboard labeled CPU_FSB, this jumper sometimes gets set to 100mhz, rather then 133mhz (the default). What’s in this 'custom MCP-T' from ASUS then? http://forums.pcper.com/showthread.php?292108-Asus-a7n8x-deluxe-bios-settings Q.

I have a third party sound card that i want to use, but i cannot get the game port to work. Mute unnecessary lines - on the ASUS A7N8X (and possibly other boards) it is common for the Line In and in some cases the AUX line to cause noise in your Al urslow, May 29, 2003 #17 urslow Newbie I went to the Asus site, and didn't see either of the files that are needed. The top picture shows the raised part of the socket (on the far left) and the notched out part of the heatsink (also on the far left).

My A7V333 mobo w/ the Athlon XP 2100+ was faster. click DO NOT USE THE SPD MEMORY FEATURE!! I've heard of lots of problems on this message board. Customer Service and Technical Support Center I Think I Have a Bad Part.

An unsuccessful flash can render your board useless, while its rare it does happen. this content You need to unlock your processor. USA - ftp://ftp.asus.com/pub/asus/misc/utils/ TAIWAN - ftp://ftp.asus.com.tw/pub/ASUS/misc/utils/ GERMANY - ftp://ftp.asuscom.de/pub/ASUSCOM/UTIL/PC_Probe/ Q. Q.

theonetruly: really exact same prob? Run the Detonators you downloaded and reboot. It looked like it was doing a number on the cpu, but I shut it down like I normally do at night (checked some email etc, that shut it off).Saturday morning weblink I guess my question is what's wrong w/ async?

Because of the different ground levels, electric current runs over your signal cable between the two devices. External causes Cabling and connections If you have a damaged cable this could be an obvious cause for noise issues. The 1002 bios provides all the high multipliers, and everything else is available out of the box.

My CPU will only run at 100mhz, it’s a 133 or 166mhz CPU.

Reply With Quote December 19th, 2005,03:35 AM #14 TRICKPLAYER View Profile View Forum Posts Registered User Join Date Jan 2000 Location BARRY,GLAMORGAN,UK Posts 655 Firstly if its not broke why fix The mechanical and acoustical aspects can be rather more complicated, but generally aren't. Overclock amd athlon xp3200 with asus A7n8x-e deluxe Can't find your answer ? I have my RAM installed in the #2 and #3 slots, which as far as I know should give me the dual channel set up for this mother board.

Next, overclocking. 1. An AGP PRO slot is a bit longer then a regular AGP slot. Very good! http://quodsoftware.com/asus-a7n8x/asus-a7n8x-e-deluxe-drivers.html Initial bios stuff. ------------------------ Once you're ready, hold down alt+f2 at power-on to get the bios flash utility loaded.

At the time of this writing there are rumors (have been) about a revision 1.05 board that was released. I got my pc back up and running with the newest BIOS version, but I still cannot access it, which is real bad because now it's running with default settings. my vcore is around 1.725 or so. Back to top #5 usasma usasma Still visually handicapped (avatar is memory developed by my Dad BSOD Kernel Dump Expert 23,397 posts OFFLINE Gender:Male Location:Southeastern CT, USA Local time:01:36 PM

Can i use my old one? Once you turn the board on, something metal could be shorting it out.